We supply SUPER ENGINEERING PLASTICS(SUMIKASUPER LCP, SUMIKAEXCEL PES).
- Home
- Product Information
- SUMIKASUPER LCP
- Adhesion
カジノ シークレット 勝て ないUMIKASUPER LCP, adhesion using commercially available adhesives (Table 5-6-1) is possible without any special surface treatment.
The bonded surface retains practical adhesive strength even after thermal aging at カジノ シークレット 勝て ない. Crystalline resins such as PPS may warp when the curing temperature is raised. However, warping does not occur with SUMIKASUPER LCP even when cured at a high temperature of 120 to 150°C, allowing for short processing times. For recommendations on how to use a particular adhesive, contact the adhesive manufacturer.
Adhesive Strength Measurement Method
カジノ シークレット 勝て ない conditions are as follows.
- Test piece
ASTM No.1 test piece (thickness 3.2mm) - Test method
After applying the adhesive to カジノ シークレット 勝て ない pieces, they are overlapped by 10mm and cured in a hot air circulation oven. - Measurement of strength
Measure the shear strength at a tensile speed of 1.67 x 10-4m/s.
Figure 5-6-1 Measurement Method of Adhesion Test
Table 5-6-1 Adhesive Strength of SUMIKASUPER LCP with Commercial Adhesives
Unit: MPa
| Adhesive | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| TB2234D (ThreeBond) |
Sumimac ECR-9173K (Sumitomo Bakelite) |
||||||||
| After curing | カジノ シークレット 勝て ない,1hr thermal aging |
230°C,1min IR Reflow |
After curing | カジノ シークレット 勝て ない,1hr thermal aging |
|||||
| E5008 | 9.2 | 3.0 | 9.2 | 9.1 | 3.8 | ||||
| E6008 | 7.7 | 2.8 | 7.8 | 8.8 | 3.5 | ||||
| Adhesive | ||||||
|---|---|---|---|---|---|---|
| Technodyne AH 7052T (Taoka Chemical) |
Technodyne AH 6072K (Taoka Chemical) |
Technodyne AH 062K (Taoka Chemical) |
||||
| After curing | カジノ シークレット 勝て ない,1hr thermal aging |
After curing | カジノ シークレット 勝て ない,1hr thermal aging |
After curing | カジノ シークレット 勝て ない,1hr thermal aging |
|
| E5008 | 6.2 | 4.6 | 6.7 | 4.3 | 6.6 | 3.8 |
| E6008 | 7.0 | 4.4 | 6.1 | 4.2 | 5.6 | 5.0 |
